Not Authorized
You are currently not authorized to access this section.
Please contact your Administrator to change your authorization settings.
Please contact your Administrator to change your authorization settings.
Mechanic II
Oshkosh, WI / Appleton, WI / Green Bay, WI
Job Description
Summary:
STS Technical Services is actively seeking candidates for a Mechanic II role with our Fortune 350 Client! In this role, you’ll need to be qualified in heavy and medium truck mechanics. Air conditioning certification is preferred.
Duties and Responsibilities:
1. Assemble and/or install a variety of major and minor subassemblies, parts and systems as directed. Typical parts are brackets, wiring, radiators, axles, air systems, hydraulic steering and lines, air lines, electronic lines, valves, tanks, brackets, linkages, etc.
2. Cut, fit, bend and adjust parts for fit or function as directed
3. Drill, ream or tap holes for mounting or clearance as directed
4. Measure wire, tubing or hose paths and cut tubing to length as directed
5. Fill batteries and accessory grease points and apply sealants as directed
6. Start up engine, check dashboard instruments for proper function
7. Assemblies weigh up to 10,000 lbs., handle with appropriate equipment, such as cranes, dollies etc. which are provided
8. Install various aftermarket parts and assemblies on truck such as brackets, wiring, hydraulic lines, air lines, etc.
9. Ability to follow work instructions and quality standards
10. Ability to follow engineering prints and bill of materials
11. Perform repairs/alterations on vehicles such as drilling holes or modify sheet medal
12. Install various harnesses and batteries
13. Requires the use of simple arithmetic and some measuring instruments such as caliper or scale
14. Diagnose and/or repair problems and provide failure analysis on a follow-up service report on all areas of responsibility
15. Perform other duties as assigned
Basic Qualifications:
1. High School Diploma or equivalent
2. Must have a Commercial Driver’s License
3. Minimum of 3-5 years of experience in the Automotive Field Service and/or Automotive Technical Support areas (extensive mechanical experience)
4. Prior experience using pneumatic hand tools, drill, and truck parts
5. Ability to read Technical Manuals and blueprints and follow work instructions
6. Must be able to communicate effectively and professionally and present a professional appearance during this project assignment
7. Personal protective equipment such as steel toed boots is a contractor requirement.
8. Ability to lift at least 50 lbs.
9. Experience, certification, and education needed.
10. Able to perform multi axle wheel alignment.
11. Ability to use software and program vehicle computers.
12. Be able to provide estimates for repairs required.
13. Able to perform complete vehicle overhaul to include frame replacement.
STS Technical Services
The leading provider of technical, professional, and industrial workforce solutions for the commercial, industrial, and defense markets. From mining to manufacturing, defense to transportation, engineering to maintenance, our services encompass the total life-cycle of a product; strategically designed to keep our clients engineering, manufacturing, operating and maintaining. For nearly 40 years we have provided contract and direct positions with the finest companies in America, with opportunities in your local region, nationwide, and around the world.
STS Technical Services is an equal opportunity employer.
STS Technical Services is actively seeking candidates for a Mechanic II role with our Fortune 350 Client! In this role, you’ll need to be qualified in heavy and medium truck mechanics. Air conditioning certification is preferred.
Duties and Responsibilities:
1. Assemble and/or install a variety of major and minor subassemblies, parts and systems as directed. Typical parts are brackets, wiring, radiators, axles, air systems, hydraulic steering and lines, air lines, electronic lines, valves, tanks, brackets, linkages, etc.
2. Cut, fit, bend and adjust parts for fit or function as directed
3. Drill, ream or tap holes for mounting or clearance as directed
4. Measure wire, tubing or hose paths and cut tubing to length as directed
5. Fill batteries and accessory grease points and apply sealants as directed
6. Start up engine, check dashboard instruments for proper function
7. Assemblies weigh up to 10,000 lbs., handle with appropriate equipment, such as cranes, dollies etc. which are provided
8. Install various aftermarket parts and assemblies on truck such as brackets, wiring, hydraulic lines, air lines, etc.
9. Ability to follow work instructions and quality standards
10. Ability to follow engineering prints and bill of materials
11. Perform repairs/alterations on vehicles such as drilling holes or modify sheet medal
12. Install various harnesses and batteries
13. Requires the use of simple arithmetic and some measuring instruments such as caliper or scale
14. Diagnose and/or repair problems and provide failure analysis on a follow-up service report on all areas of responsibility
15. Perform other duties as assigned
Basic Qualifications:
1. High School Diploma or equivalent
2. Must have a Commercial Driver’s License
3. Minimum of 3-5 years of experience in the Automotive Field Service and/or Automotive Technical Support areas (extensive mechanical experience)
4. Prior experience using pneumatic hand tools, drill, and truck parts
5. Ability to read Technical Manuals and blueprints and follow work instructions
6. Must be able to communicate effectively and professionally and present a professional appearance during this project assignment
7. Personal protective equipment such as steel toed boots is a contractor requirement.
8. Ability to lift at least 50 lbs.
9. Experience, certification, and education needed.
10. Able to perform multi axle wheel alignment.
11. Ability to use software and program vehicle computers.
12. Be able to provide estimates for repairs required.
13. Able to perform complete vehicle overhaul to include frame replacement.
STS Technical Services
The leading provider of technical, professional, and industrial workforce solutions for the commercial, industrial, and defense markets. From mining to manufacturing, defense to transportation, engineering to maintenance, our services encompass the total life-cycle of a product; strategically designed to keep our clients engineering, manufacturing, operating and maintaining. For nearly 40 years we have provided contract and direct positions with the finest companies in America, with opportunities in your local region, nationwide, and around the world.
STS Technical Services is an equal opportunity employer.
Job Summary
Start Date
ASAP
Employment Term and Type
Temporary, Full Time
Hours per Week
40
Required Education
High School or Equivalent
Required Experience
3+ years
Email this Job to Yourself or a Friend